Setting A Transit Entry Queue - Polycom RMX 2000 Administrator's Manual

Chapter 3-Entry Queues, Ad Hoc Conferences and SIP Factories
3-6

Setting a Transit Entry Queue

The RMX factory default settings define the Default Entry Queue also as
the Transit Entry Queue. You can designate another Entry Queue as the
Transit Entry Queue.
Only one Transit Entry Queue may be defined per RMX and selecting
another Entry Queue as the Transit Entry Queue automatically cancels the
previous selection.
To designate an Entry Queue as Transit Entry Queue:
1
In the RMX Management - Rarely Used pane, click Entry Queues.
2
In the Entry Queues list, right-click the Entry Queue entry and then
click Set Transit EQ.
The Entry Queue selected as Transit Entry Queue is displayed in bold.
To cancel the Transit Entry Queue setting:
1
In the RMX Management - Rarely Used pane click Entry Queues.
2
In the Entry Queues list, right-click the Transit Entry Queue entry and
then click Cancel Transit EQ.