Polycom RMX 2000 Administrator's Manual page 30

Chapter 3-Entry Queues, Ad Hoc Conferences and SIP Factories
3-4
3
Define the following parameters:
Table 3-2: Entry Queue Definitions Parameters
Option
Name
Profile
ID
Entry Queue
Service
Ad Hoc
Cascade
Description
Enter a unique-per-MCU name of the Entry Queue
using up to 80 characters.
Select the Profile to be used by the Entry Queue. The
default Profile is selected by default. This Profile
determines the Bit Rate and the video properties with
which participants connect to the Entry Queue and
destination conference.
In Ad Hoc conferencing it is used to define the new
conference properties.
Enter a unique number identifying the Entry Queue for
dial in. Default string length is 4 digits.
If you do not manually assign the Entry Queue ID, the
MCU assigns one after the completion of the definition.
The ID String Length is defined by a flag in the System
Configuration.
By default, the Entry Queue IVR Service set as default
is selected. Select the Entry Queue IVR Service that
includes the required voice prompts to guide the
participants during their connection to the Entry
Queue.
Select this check box to enable the Ad Hoc option for
this Entry Queue.
Select this check box to define this Entry Queue for
cascaded conferencing. If this option is enabled, this
Entry Queue should not be used for connecting
participants to conferences.
For more information about cascaded conferencing,
see "Cascading Conferences" on page 6-19.