Polycom RMX 2000 Administrator's Manual page 60

Chapter 5-Conference and Participant Monitoring
5-8
The General, Advanced and Information tabs include the same properties for
new and defined participants. For more information, see "Adding a new
participant to the Address Book" on page 4-4.
Table 5-3 Participant Properties - Media Sources Parameters
Field
Name
Layout Type
Video Layout
Mute/Suspend
Block
Description
Indicates the participant's name.
Indicates whether the video layout currently viewed by the
participant is the Conference or Personal Layout. If
Personal Layout is selected, you can select a Video
Layout that will be viewed only by this participant.
Indicates the video layout currently viewed by the
participant. When Personal Layout is selected in the
Layout Type you can force participants to the video
windows in a layout that is specific to the participant. For
more information, see RMX 2000 Getting Started Guide,
"Personal Layout Control" on page 3-40.
Indicates if the endpoint's audio and/or video channels
from the endpoint have been muted/suspended and who
had initiated audio mute or video suspend.
•
MCU – Audio or Video channel has been muted/
suspended by the MCU.
•
Operator – Channels have been muted/suspended
by the RMX user.
•
Participant – Channels have been muted/
suspended by the participant from his/her endpoint.
You can also cancel or perform mute and suspend
operation using these check boxes.
Indicates if the audio transmission from the conference to
the participant is blocked. You can block or cancel the
block using this check box.