Polycom RMX 2000 Administrator's Manual page 43

4
Define the following Advanced parameters:
Table 4-3 New Participant – Advanced Properties
Field
Auto Video Bit
Rate
Video Protocol
Polycom RMX 2000 Administrator's Guide
Description
This check box is automatically selected to use the
Line Rate defined for the conference.
Note: This check box cannot be cleared when
defining a new participant during an ongoing
conference.
To specify the video rate for the endpoint, clear this
check box and then enter the required video rate.
Select the video compression standard used for the
participant connection: H.263 or H.264 depending on
the participant's capabilities.
•
Auto – the MCU selects the video protocol
according to the endpoint's capabilities.
4-7