Polycom RMX 2000 Administrator's Manual page 66

Chapter 5-Conference and Participant Monitoring
5-14
Table 5-6 Participant Properties - Channel Status Parameters (Continued)
Field
Sync Status
Rx Rate
Tx Rate
I–video sync loss
r–video sync loss
FECC Token
Content Token
Description
Channel - The channel type: Video or Content.
Source - The name of the participant currently viewed by
this participant.
Position - The video layout position indicating the place
of each participant as they appear in a conference.
Protocol Sync Loss - Indicates whether the system was
able to synchronize the bits order according to the
selected video protocol.
Video Intra Sync - Indicates wether the synchronization
on a video Intra frame was successful.
Video Resolution - The video resolution of the
participant.
.
The received line rate
The transmitted line rate.
A selected check box indicates a video synchronization
problem in the MCU. The counter indicates the number of
times the MCU had to synchronize.
A selected check box indicates a video synchronization
problem in the gatekeeper. The counter indicates the
number of times the endpoint had to synchronize.
Indicates if the participant is the holder of the FECC Token
and has control over a far-end camera (for FECC enabled
conferences).
When checked, indicates that the participant is holding
the Content Token, and transmits Content.