Polycom RMX 2000 Administrator's Manual page 131

The Monitoring Central Signaling – SIP Servers dialog box displays the
following fields:
Table 8-11 Monitoring Central Signaling – SIP Servers Parameters
Field
Role
Name
IP
Status
Polycom RMX 2000 Administrator's Guide
Description
Active -The default SIP Server is used for SIP
traffic.
Backup -The SIP Server is used for SIP traffic if the
preferred proxy fails.
The name of the SIP Server.
The SIP Server's IP address.
The connection state between the SIP Server and
the Signaling Host.
Not Available - No SIP server is available.
Auto - Gets information from DHCP, if used.
8-25