Polycom RMX 2000 Administrator's Manual page 42

Chapter 4-Address Book
4-6
Table 4-2 New Participant – General Properties (Continued)
Field
SIP Address/
Type
SIP Only
Audio Only
3 Usually, additional definitions are not required and you can use the
system defaults for the remaining parameters. In such a case, click
OK.
To modify the default settings for advanced parameters, click the
Advanced tab.
Description
Select the format in which the SIP address is written:
• SIP URI - Uses the format of an E-mail address,
typically containing a user name and a host name:
sip:[user]@[host]. For example,
sip:dan@polycom.com.
•
TEL URI - Used when the endpoint does not
specify the domain that should interpret a
telephone number that has been input by the user.
Rather, each domain through which the request
passes would be given that opportunity. As an
example, a user in an airport might log in and send
requests through an outbound proxy in the airport.
If the users enters "411" (this is the phone number
for local directory assistance in the United States),
this number needs to be interpreted and
processed by the outbound proxy in the airport,
and not by the user's home domain.
In this case, tel: 411 is the correct choice.
Select this check box to define the participant as a
voice participant, with no video capabilities.