Polycom RMX 2000 Administrator's Manual page 136

3
Click the Add Language button.
The New Language dialog box opens.
4
In the New Language box, enter the name of the new language. The
language name cannot start with a digit.
5
Click OK.
The new language is added to the list of Supported Languages.
To upload messages to the MCU:
1
You can upload audio files for the new language or additional files
for an existing language now, or you can do it during the definition of
the IVR Service. In the latter case, you can skip the next steps
•
Voice messages should not exceed 3 minutes.
• It is not recommended to upload more than 1000 audio files to the MCU
memory.
2
To upload the files to the MCU, in the Supported Languages dialog box,
click the Add Message File button.
3
The Add Message File dialog box opens.
Audio files are uploaded to the MCU one-by-one.
Polycom RMX 2000 Administrator's Guide
.
9-5