Polycom RMX 2000 Administrator's Manual page 234

Appendix B-Active Alarms
Category Code
DNS Agent – AA_BAD_ETHERNET_
General SETTINGS
AA_IDE_NOT_IN_DMA_
MODE
AA_FAILED_TO_OPEN_
APACHE_CONFIGURATION_
FILE
AA_FAILED_TO_SAVE_
APACHE_CONFIGURATION_
FILE
AA_EXTERNAL_NTP_
SERVERS_FAILURE
AA_NTP_SYNC_FAILURE
AA_ILLEGAL_TIME
QAAPI– CAN_NOT_ESTABLISH_
General CONNECTION_WITH_APPLI
CATION_SERVER
Resource– INSUFFICIENT_RESOURCES
General
SIP Proxy SIP_REGISTRATION_LIMIT_
REACHED
CAN_NOT_ESTABLISH_
CONNECTION_WITH_SIP_
REGISTRAR
B-8
Description
Incorrect Ethernet Settings:
Ethernet should be set to 100 Full Duplex, Auto
Negotiation - off.
DMA not supported by IDE device:
•
DMA (direct memory access) not supported
by IDE device: Incompatible flash card / hard
disk being used.
•
Flash card / hard drive are not properly
connected to the board / one of the IDE
channels is disconnected.
•
DMA was manually disabled for testing.
Failed to open Apache configuration file.
Failed to save Apache configuration file.
External NTP server failure:
NTP server failure: [server0_ip], [server1_ip],
[server2_ipStr].
Failed to synchronize with NTP server.
Invalid date and time:
MCU year ([year]) must be 2000 or later.
Failed to connect to application server:
Failed to establish connection to server, url =
[url].
Insufficient resources.
SIP registrations limit reached.
Cannot establish connection with SIP registrar.