Conferencing Modes; Standard Conferencing - Polycom RMX 2000 Administrator's Manual

Chapter 1-Conference Profiles

Conferencing Modes

Standard Conferencing

1-2
This Profile is automatically assigned to the following conferencing
entities:
Name
Meeting Rooms
Maple_Room
Oak_Room
Juniper_Room
Fig_Room
Entry Queue
Default EQ
When defining a new video Profile, you select the parameters that
determine the video display on the participant's endpoint and the qualify
of the video. When defining a new conference Profile, the system uses
default values for standard conferencing. Standard conferencing enable
several participants to be viewed simultaneously and each connected
endpoint uses its highest video, audio and data capabilities up to the
maximum bit rate set for the conference.
The main parameters that define the quality of a video conference are:
• Bit Rate - The transfer rate of video and audio streams. The higher
the bit rate, the better video quality that can be viewed.
• Audio Algorithm - The audio compression algorithm determines the
quality of the conference audio.
• Video protocol, video format, frame rate, annexes, and interlaced
video mode - These parameters define the quality of the video
images. The system selects the appropriate video setting for each
endpoint according to the endpoint capabilities when connecting to
ID
1001
1002
1003
1004
1000