Polycom RMX 2000 Administrator's Manual page 117

Table 8-5 Default IP Service – Networking – IP Parameters (Continued)
Field
Network Type
Signaling Host IP
Address
MPM 1 IP Address
MPM 2 IP Address
Subnet Mask
Polycom RMX 2000 Administrator's Guide
Description
Displays the network type selected during the First
Entry configuration.
You can select:
•
H.323: For an H.323-only Network Service.
•
SIP: For a SIP-only Network Service.
• H.323 & SIP: For an integrated IP Service. Both
H.323 and SIP participants can connect to the
MCU using this service.
Note: This field is displayed in all Default IP Service
tabs.
Displays the IP address of the Signaling Host, as
defined during First Entry configuration. If required,
enter a new IP address. This IP address can be
used by endpoints dialing directly to the MCU. This
IP address registered with the gatekeeper, if
present.
The IP addresses of the Media boards.
Enter the subnet mask of the MCU's IP cards.
Default value: 255.255.255.0.
8-11