Polycom RMX 2000 Administrator's Manual page 250

Appendix C-CDR Fields - Unformatted File
C-14
Table C-4 Event Fields for Event 2001 - CONFERENCE START CONTINUE 1
Field
Audio Tones
Alert Tone
Talk Hold Time
Audio Mix Depth
Operator
Conference
Video Protocol
Meet Me Per
Conference
Number of Network
Services
Description
The audio tones that were used in the conference, as
follows:
Bit 0 on - Entry tone
Bit 1 on - Exit tone
Bit 2 on - End time alert tone
This field is only relevant if the end time alert tone is
enabled.
Indicates when the end time alert tone is to be played. A
value of x indicates that the alert tone is to be played x
minutes before the conference end time.
The minimum time that a speaker has to speak to
become the video source.
The value is in units of 0.01 seconds.
Currently the only value is 300, which indicates a talk
hold time of 3 seconds.
The maximum number of participants whose audio can
be mixed.
Currently the only value is 5.
Not supported.
Always contains the value 0.
The video protocol.
Currently the only value is:
255 - Auto
Indicates the Meet Me Per Conference setting.
Currently the only value is:
1 - The Meet Me Per Conference option is enabled, and
dial-in participants can join the conference by dialing the
dial-in number.
Not supported.
Always contains the value 0.