Modifying The Management Network - Polycom RMX 2000 Administrator's Manual

Chapter 8-Network Services

Modifying the Management Network

8-4
The Management Network parameters need to be modified if you want to:
• Connect directly to the MCU from a workstation
• Modify routes
• Modify DNS information
To view or modify the Management Network Service:
1 In the RMX Management pane, click Network Services.
2
In the Network Services list pane, double-click the Management
Network entry.
The Management Network Properties - IP dialog box opens.
3
View or modify the following fields:
Table 8-1 Management Network Properties – IP Parameters
Field
Network Service
Name
Control Unit IP
Address
Description
Displays the name of Management Network. This
name cannot be modified.
Note: The field is displayed in all Management
Network Properties tabs.
The IP address of the RMX Control Unit. This IP
address is used by the RMX Web Client to connect
to the RMX.