Polycom RMX 2000 Administrator's Manual page 28

Chapter 3-Entry Queues, Ad Hoc Conferences and SIP Factories
3-2
The Entry Queue can also be used for Ad Hoc conferencing. If the Ad Hoc
option is enabled for the Entry Queue, when the participant enters the
target conference ID the system checks whether a conference with that ID
is already running on the MCU. If not, the system automatically creates a
new ongoing conference with that ID. For more information about Ad
Hoc conferencing, see "Ad Hoc Conferencing" on page 3-7.
An Entry Queue can be designated as Transit Entry Queue to which calls
with dial strings containing incomplete or incorrect conference routing
information are transferred. For more information, see "Transit Entry
Queue" on page 3-5.
The system is shipped with a default Entry Queue whose properties are:
Table 3-1 Default Entry Queue Properties
Parameter
Name
ID
Profile name
Entry Queue
Service name
Ad Hoc
Cascade
Value
DefaultEQ
1000
DefaultVideo384. Profile Bit Rate is set to 384 Kbps.
Entry Queue IVR Service. This is default Entry Queue IVR
Service shipped with the system and includes default
voice messages and prompts in English.
Enabled
Disabled