Chapter 6-Additional Conferencing Information
6-22
3
Define the standard Entry Queue parameters (as described in
Chapter 3) and click the Cascade check box.
If you are defining an HD cascaded Entry Queue, it is recommended
to select the same Profile that is selected for both conferences.
4
Click OK.
The new Entry Queue enabling cascading is created.
Creating the Dial-out Cascaded Link
The dial-out link (participant) is created or added in the linked conference
(Conference A). The dial-out string defined for the participant is the
dialing string required to connect to the destination conference
(Conference B) Entry Queue defined on the MCU hosting the destination
cascaded conference. The dial-out participant can be defined in the
Address Book and added to the conference whenever using the same
cascade-enabled Entry Queue and a destination conference (with the
same ID and Password).
To define the Dial-out Cascaded Link:
1
Display the list of participants in the linked conference
(Conference A).
2
In the Participant List pane, click the New Participant
button.