Chapter 8-Network Services
Modifying the Default IP Service
8-10
The Default IP Service parameters need to be modified if you want to
change the:
•
Network type that the RMX connects to
•
IP address of the RMX Signaling Host Media boards
•
Subnet mask of the RMX's IP cards
To view or modify the Default IP Service:
1
In the RMX Management pane, click Network Services.
2
In the Network list pane, double-click the Default IP Service entry.
The Default IP Service - Networking IP dialog box opens.
3
View or modify the following fields:
Table 8-5
Default IP Service – Networking – IP Parameters
Field
Network Service
Name
Description
Displays the name of the IP service. This name
cannot be modified.
Note: The field is displayed in all Default IP Service
tabs.