Creating The Dial-Out Link From A Conference Running On The Mgc To The Conference Running On The Rmx - Polycom RMX 2000 Administrator's Manual

Creating the Dial-out Link from a Conference Running on
the MGC to the Conference Running on the RMX
To monitor both conferences, administrators need to open two browser
windows entering the IP addresses of each MCU, as illustrated above.
In the same way that the dial-out cascaded link is created in the RMX, you
can create a dial-out participant in the MGC.
In the MGC Manager application, define a new participant as follows:
1
In the Participant Properties dialog box, enter a Participant Name,
select Dial-out and H.323.
2
Define the dialing string as described in step 6 on page
methods are applicable).
3
In the Advanced tab's Node Type field, select MCU.
4
Click OK.
Polycom RMX 2000 Administrator's Guide
+
1 2
6-23 (both
3
6-27