Figure 2-5
Modifying the Default IP Address
After accessing the RMX 1000 Web configuration interface, you can modify
the default IP address for the device based on the settings of your local
network.
1
2
3
Figure 2-6
Table 2-1
Product Activation Page
Click the IP Setting configuration item in the RMX Management pane.
In the IP Setting configuration pane, right-click, and select LAN1 ->
Properties.
In the LAN1 Settings dialog box, set the IP address obtained from the
network administrator, and configure the device for use on your local
network.
Modifying the IP Address
LAN Port Setting Parameters
Parameter
Description
Polycom RMX 1000 User Guide
2-3