Modifying The Default Ip Address - Polycom RMX 1000 Getting Started Manual

Modifying the Default IP Address

After accessing the RMX 1000 Web configuration interface, you can
modify the default IP address for the device based on the settings of
your local network.
1 Click the IP Network Services configuration item in the RMX
Management pane.
2 In the IP Network Services configuration pane, right-click, and select
LAN1 -> Properties.
3 In the LAN1 settings dialog box, set the IP address obtained from
the network administrator, and configure the device for use on
your local network.
8