Procedure 4: Modifying The Default Ip Service Settings - Polycom RMX 2000 Getting Started Manual

Procedure 4: Modifying the Default IP Service Settings

4
Start the RMX Web Client application on the workstation, by entering
http://<Control Unit IP Address>
the browser's address line and pressing Enter.
5
In the RMX Welcome Screen, enter the default
Username(POLYCOM)and Password(POLYCOM)and click Login.
The RMX Web Client opens and the Product Activation dialog box
appears with the serial number filled in:
6
Enter the Product Activation Key retrieved earlier (or paste it) and click
OK.
The Fast Configuration Wizard appears.
The Fast Configuration Wizard enables you to configure the Default IP
Service. It starts automatically whenever one or both of the following
conditions occurs:
• The RMX cannot access the Default IP Service. This happens during
First Time Power-up, before the service has been defined.
• The Default IP Service has been deleted, followed by an RMX reset.
Polycom RMX 2000 Getting Started Guide
as defined in the USB key in
2-9