Isuzu 1999 RODEO Workshop Manual page 1229

Hide thumbs Also See for 1999 RODEO:

Table of Contents

6D3–12 STARTING AND CHARGING SYSTEM (6VD1 3.2L)

Continuity of Contacts

With the plunger faced downward, push down the

magnetic switch. In this state, check for continuity

between terminals B and M. Replace, if there is no

continuity (i.e., contacts are faulty).

Check if the pinion rotates smoothly in drive direction by

hand, or if it is locked when it is rotated in reverse. If not,

replace the pinion.

Yoke Assembly

Check a magnet inside the yoke.

Replace the yoke assembly if it is broken.

Ball Bearing

Clamp the inner race of the ball bearing with your finger,

and check for sticking or play when rotating the outer

Replace, if abnormality is found.

Show Quick Links

Chapters

Table of Contents