Evap Test - Isuzu 1999 RODEO Workshop Manual

5. Select F0:Fuel Pump Relay.
6. Push "On" soft key.
7. Control Fuel Pump Relay and check data list.
8. If the data list changes, the Fuel Pump Relay is
normal.
9. Select F1:A/C Clutch Relay.
10. *Run the Engine at idle.
RODEO 6VD1 3.2L ENGINE DRIVEABILITY AND EMISSIONS
060RX021
060RX022
11. Turn on Air Condtioning.
12. Push "On" and "Off" soft keys.
13. Control A/C Clutch Relay and check data list.
14. If the data list changes, the A/C Clutch Relay is
normal.

EVAP Test

This test is conducted check EVAP system for its working.
Tech 2 must be used for this test.
Test Procedure:
1. Connect Tech 2 to the vehicle DLC.
2. Run the Engine at idle.
3. Select F3: Miscellaneous Test in the Application
Menu.
6E2–41
060RX023
060RW228