Club Car Gasoline Service Manual page 349

2. Remove the screws (11) and nuts (12) that mount the forward and reverse switch to the body (Figure
19-17).
3. Pull the forward and reverse switch away from the body and out of the battery compartment for ease of
service.
4. If wires must be disconnected from the forward and reverse switch, label them so they will be recon-
nected properly.
Servicing the Forward and Reverse Switch
1. Keep the switch clean.
WARNING
• DO NOT GREASE CONTACTS. THIS COULD CAUSE THE SWITCH TO MALFUNCTION OR
BURN.
2. If the forward and reverse switch is stiff or binds in operation, lubricate the contact face of the switch
with WD-40® spray lubricant.
Installing the Forward and Reverse Switch
1. Install the forward and reverse switch by reversing the removal procedure.
19B
E
Page 19-33