Club Car Gasoline Service Manual page 270

General Information, Continued:
16
To provide optimum performance for the OHV engine and powertrain, Club Car has developed a series of
tuned clutches. When ordering replacement clutches or clutch parts for a DS vehicle with an OHV engine,
G
the following part numbers should be specified:
• Drive Clutch Assembly - Club Car Part No. 1016378-02
• Driven Clutch Assembly - Club Car Part No. 1016360-01
• Drive Clutch Weight Kit - Club Car Part No. 1016801
To properly disassemble and assemble the torque converter, the following tools are required:
• Drive Clutch Puller - Club Car Part No. 1014496
• Drive Clutch Hub Puller - Club Car Part No. 1014497
• Drive Clutch Holder Tool - Club Car Part No. 1015524
• Clutch Alignment Tool - Club Car Part No. 1014498
• Driven Clutch Puller Plug - Club Car Part No. 1014507
• Driven Clutch Cam Puller - Club Car Part No. 1014508
• Press Weldment - Club Car Part No. 1018091-01
All of the tools listed above are available in a torque converter tool kit, Club Car Part No. 1014510 (Figure
16-1).
DRIVE CLUTCH HUB PULLER
PART NO. 1014497)
CLUTCH ALIGNMENT TOOL
Page 16-2
TORQUE CONVERTER TOOL KIT
(CLUB CAR
DRIVE CLUTCH HOLDER TOOL
(CLUB CAR PART NO. 1015524)
(CLUB CAR
PART NO. 1014498)
(CLUB CAR PART NO. 1014510)
DRIVEN CLUTCH CAM PULLER
(CLUB CAR
PART NO. 1014508)
FIGURE 16-1
DRIVEN CLUTCH
CAM PRESS ON TOOL
(CLUB CAR
PART NO.1018091-01)
DRIVEN CLUTCH
PULLER PLUG
(CLUB CAR
PART NO. 1014507)
DRIVE CLUTCH PULLER
(CLUB CAR
PART NO. 1014496)