Club Car Gasoline Service Manual page 312

Inspecting and Removing Shock Absorbers, Continued:
18
G
2
13
3
2. To remove a shock absorber, remove the nut (5), cup washer and rubber bushing (Item 7) from the
shock absorber stem (Figure 18-1).
3. Remove the nut (14) and washer (15) from the lower mounting stud (Figure 18-1).
4. Compress the shock absorber to remove it.
INSTALLING SHOCK ABSORBERS
1. To install, reverse the removal procedure.
2. On the upper shock absorber mount, tighten the nut until the rubber bushing expands to the size of the
cup washer.
3. On the lower mounts, tighten the nuts to 50-60 ft.lbs. (68/81 N-m).
Page 18-2
4
9
10
11
12
5
7
6
8
15
14
FIGURE 18-1
4
3
4
13
1
13
2
1
2
4
3
4