wire or blue wire, depending on the position of the rocker switch. When operating the vehicle in forward, the
white wire supplies voltage from the rocker switch No. 3 terminal to the Z6 position on the Z plug/controller.
When operating the vehicle in reverse, the blue wire supplies voltage from the rocker switch No. 1 terminal to
the controller Z7 position.
NOTE
• THE REVERSE BUZZER SHOULD SOUND WHEN THE FORWARD AND REVERSE ROCKER
SWITCH IS IN THE REVERSE POSITION.
R
F
3
1 2
+
-
+
-
5
6
CONTROLLER ACTIVATING CIRCUIT (FIGURE 21-9, PAGE 21-10)
The Controller Activation Circuit supplies voltage to the Z8 position on the Z plug/controller. This will activate
the controller to operate the vehicle.
The Controller Activating Circuit consists of:
• The Key Switch
• The Accelerator Pedal Limit Switch
• Z8 Transistor located inside the controller.
• The 18 gauge green wire from the large post of the Main solenoid to the key switch No. 1 terminal.
• The 18 gauge blue wire from the key switch No. 2 terminal to the accelerator pedal limit switch.
• The 18 gauge green/white wire from the accelerator pedal limit switch to the Z8 position on the Z Plug/
controller.
+
-
-
2
BATTERY
BANK
1
+
-
+
-
3
4
FIGURE 21-8
+
Z7
Z6
21A
E
Page 21-9