Club Car Gasoline Service Manual page 277

10-24 SCREW
FLAT WASHER
DRIVE BUTTON
DRIVE BUTTON
TAKE UP SPRING
FIGURE 16-8
FIGURE 16-10
INSPECTION OF DRIVE CLUTCH PARTS
1. Inspect the idler bearing (6) for smooth rotation or seal damage (Figure 16-5, Page 16-7).
NOTE
• IT IS NORMAL FOR A SMALL AMOUNT OF GREASE TO BE PRESENT AT THE EDGE OF THE
SEAL.
REMOVE THESE
ITEMS FROM RIBS
RIBS
PRESS RAM
IDLER BEARING
BEARING PULLER
FIXED FACE
ASSEMBLY
1/4-20 SCREW
FLAT WASHER
WEIGHT
WEIGHT
SLOTS IN HUB
CASTING
FIGURE 16-9
USE A SCRIBE TO REMOVE
SPIRAL BACK-UP RINGS FROM BOTH
SIDES OF FIXED FACE ASSEMBLY.
DISCARD THEM.
FIGURE 16-11
16
G
Page 16-9