Viewing System Information; Upgrading Version At Normality; Table 31 Show Version Command Window - Zte ZXR10 2920 User Manual

Viewing System Information

Purpose This topic
information.
For system view, perform the following steps.
Steps
1. To view hardware and software versions of the System, use
show version command in global configuration mode as
shown in Table 31.
T
A B L E
Format
Show
version
Result: This shows the running software and hardware
information of system.
Example: The following information is displayed after
carrying out show version command.
zte(cfg)#version
The System's Hardware Info:
22
The System's Software Info:
seconds
Zte(cfg)#
E
ND OF STEPS
Result System information has been viewed.

Upgrading Version at Normality

Purpose This topic describes the procedure of software version upgrade
for ZXR10 2920/2928/2952 in normal case.
describes the
3 1 S V C
H O W E R S I O N O M M A N D
Mode
config
Switch's Mac Address: 00.
Module 0: ZXR10 5124; fasteth:
Version number : V1.
Version make date: Jun 16 2006
Version make time: 16:27:13
System has run 0 years 2 days 3 hours 8 minutes 43
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 6 System Management
procedure for viewing
W
I N D O W
Function
This display the version
information about the software
and hardware of system
d0. d0.
0; gbit: 24;
1. 11. b
system
f0. 11.
57