Running The Self Tests; Selecting An Emulation; Changing Emulations - Genicom 930 User Manual

Running the Self Tests

Font Sample Test
To run the test:
Turn the printer
off, then press
LF
and hold the
LF
Micro Feed
Down
key while
GROUP
turning the
printer back on.
To stop the test before it
finishes:
SEL
Press .
SEL SEL
MENU
EXIT
ASCII Test
To run the test:
Turn the printer
off, then press
and hold the
QUIET
key while
QUIET
TOF
turning the
printer back on.
To stop the test:
SEL
Press .
SEL SEL
MENU
EXIT

Selecting an Emulation

Your printer has four emulations:
®
• Epson FX (ESC/P)
®
• IBM Proprinter III (PPSII)
• TI 855 DP and TI 855 WP

Changing Emulations

1. Make sure paper is loaded.
2. Press + : the printer enters the Menu Mode.
SHIFT SEL
3. Press : the following line prints:
LF
Printer Control
4. Press consecutively until the emulation you wish to
TEAR
select prints in the right-hand column.
5. Press + to save your setting and exit the Menu
SHIFT SEL
Mode.
Emulation Mode IBM PPR
Getting Started E-15