Adjustment Program Installation Procedure; Adjustment Program Initial Setting Menu - Epson Stylus COLOR 880 Service Manual

Color inkjet printer
Hide thumbs Also See for Stylus COLOR 880:
Table of Contents

Advertisement

EPSON Stylus COLOR 880
The user interface of the Sequential repair service program is as following
figure.
Figure 5-9. Sequential repair service program main menu

5.2.4 Adjustment Program Installation Procedure

This adjustment program is in the 3.5 2HD FD. The first FD is the installer disk.
When you execute Setup. exe, the installation of the program will be started
under Windows 95. After installation is completed, the Stylus COLOR 880 icon
will be automatically made in the program menu. Go "Start" -> "Program" and
click the icon to start this program.

5.2.5 Adjustment Program Initial Setting menu

You have to input the following four items before entering the adjustment main
menu.
Model name (Stylus COLOR 880)
Interface setting (LPT1, LPT2, LPT3,EPUSB1, EPUSB2, EPUSB3 )
Destination (Standard)
Program type (Ind ivid ual service ad justm ent p rog ram or S equ ential repair service
prog ram )
Adjustment
Follow the procedure below to input the initial settings.
1) When you run this program, the following menu appears. Select the Style
COLOR 880 in the screen below.
Figure 5-10. Model Name Selection
NOTE: This printer stores model name in the PROM. Therefore, even you select
the model name in the screen above, model name will not stored in the
EEPROM. Selecting model name in the screen above determines
respective special command for each model.
2) Select the Interface port which you connect the printer to your PC as above
Figure 5-10.
3) Select the suitable destination in the Destination menu.
Adjustment
Revision A
126

Advertisement

Table of Contents
loading

Table of Contents