Table of Contents
Advertisement
4. Select How To... to view the steps and follow the on-screen instructions.
Note: A buzzer sounds 10 minutes after the platen and print head move to the maintenance
position. Select OK to continue cleaning. The buzzer sounds again after 10 minutes. Nozzles can be
clogged if more time passes, so finish cleaning as soon as possible.
5. Replace all of the parts of the head cleaning set in the following order:
• Wiper unit
• Capping station
• Flushing pad
Caution: Lift the flushing pad carefully as ink could fly out if it is raised with too much force. After
replacing the flushing pad, make sure that it is installed correctly. If the hooks are raised when
printing, the print head could be damaged.
Note: You cannot print if the parts are not replaced.
After you replace the wiper unit, the print head moves to the maintenance position.
Parent topic:
Related references
Optional Equipment and Replacement Parts
Related topics
Disposing of Used Consumables and Optional Parts
Cleaning the Encoder Strip (Carriage Scale)
You see a message on the LCD screen when it is time to clean the encoder strip (carriage scale).
Maintenance
133
Advertisement
Table of Contents
