EPSON Stylus Pro 10000/10000CF/10600
4.3.2.2 HJFK / Dummy Board Removal
(Any of the HJFK board or the Dummy board of the option are fixed.)
1.
Remove the Optional Interface Cover of rear as described in 4.3.1.7 "Rear Cover
Removal".
HJFK / Dummy
board
Figure 4-44.
2.
Remove one screw (CS: M3 x 6) securing the HJFK board then remove the HJFK
/ Dummy board.
Figure 4-45.
Disassembly & Assembly
Thank You For Using TheServiceManualShop.com
Screw
Thank You For Using TheServiceManualShop.com
3.
Remove four screws (M3), then the board and the bracket are separated.
Disassembly
Revision D
Screws
Figure 4-46.
134