Power Supply Board Removal - Epson Stylus COLOR 900 Service Manual

EPSON Stylus COLOR 900/900N

4.2.7 Power Supply Board Removal

1. Remove the printer mechanism. (See
2. Disconnect connectors CN1, CN2, and CN3 from the C265 PSB/
PSE board.
3. Remove the three screws (including the one for grounding) that
secure the C265 PSB/PSE board to the lower case, and then
remove the C265 PSB/PSE board unit.
Screws securing the C265 PSB/PSE Board
CN1 - CN3
Figure 4-11. Removing the Connectors and Shield Box
page 92.)
Chapter 4 Disassembly and Assembly
4. Remove the two screws securing the shield plate to the power
supply board, and then remove the shield plate.
Screws securing the Shield Plate
Figure 4-12. Removing the Shield Plate
5. Remove the four screws
securing the C265 PSB/
PSE board to the bottom
frame, and then remove
the C265 PSB/PSE board.
.
Figure 4-13. C265 PSB/PSE Board Removal
Screws securing the
C265 PSB/PSE Board
97