Machine Setting; Auto Panel Reset; Energy Save Mode; Lcd Contrast - Konica Minolta magicolor 2590MF Service Manual

8. Menu mode
8.2

MACHINE SETTING

8.2.1

AUTO PANEL RESET

• Sets the period of time after which the initial screen reappears after the last print job is
Function
received or the last panel key is operated.
Use • To set the period of time by executing auto panel reset.
• The default setting is ON.
Setting/
procedure
• The default setting is "1" if ON is selected.
0.5 (min)
8.2.2

ENERGY SAVE MODE

Function
• To specify the time until the machine enters Energy Save mode after a copy cycle has
been completed or after the last key operation.
Use
• The default setting is 30 minutes.
Setting/
procedure
5 (5 min)
8.2.3

LCD CONTRAST

Function • Sets the brightness of the LCD display.
Use • To set the brightness of the LCD display.
• The default setting is
Setting/
procedure
8.2.4

LANGUAGE

Function • Sets the language of the control panel display.
Use • To change the language of the control panel display.
• The default setting is ENGLISH.
"ENGLISH"
Setting/ SPANISH
procedure SLOVAKIAN
NOTE
• The default setting of language is subject to the setting of [FAX PTT SETTING].
8.2.5

LAMP OFF TIME

Function • Sets the timing at which the scanner unit lamp turns OFF.
• MODE1: When four hours have passed since the last operation was performed
Use
• MODE2: When the machine enters Energy Save mode
• The default setting is MODE1.
Setting/
procedure
86
"ON"
"1 (min)" 2 (min)
15 (15 min)
.
LIGHT -1 "0"
FRENCH
PORTUGUESE
HUNGARIAN
"MODE1"
Field Service Ver. 1.0 Aug. 2007
OFF
3 (min) 4 (min)
"30 (30 min)" 60 (60 min)
+1 +2 DARK
GERMAN ITALIAN
RUSSIAN CZECH
POLISH JAPANESE
MODE2
5 (min)