Machine Setting; Auto Panel Reset; Energy Save Mode; Lcd Contrast - Konica Minolta magicolor 1680MF Service Manual

Field Service Ver. 1.0 Nov. 2008

12.2 MACHINE SETTING

12.2.1

AUTO PANEL RESET

• Sets the period of time after which the initial screen reappears after the last print job is
Function
received or the last panel key is operated.
Use • To set the period of time by executing auto panel reset.
• The default setting is 1min.
Setting/
procedure
12.2.2

ENERGY SAVE MODE

Function
• To specify the time until the machine enters energy save mode after a copy cycle has
been completed or after the last key operation.
Use
• The default setting is 30 min.
Setting/
procedure
12.2.3

LCD CONTRAST

Function • Sets the brightness of the LCD display.
Use • To set the brightness of the LCD display.
• The default setting is
Setting/
procedure
12.2.4

KEY SPEED

A. TIME TO START
Function
• To specify the length of time until the cursor begins to move continuously when a key is
held down.
Use
• The default setting is 1.0sec.
Setting/
procedure
B. INTERVAL
Function
• To specify the length of time until the cursor continuously moves between settings or
characters.
Use
• The default setting is 0.1sec.
Setting/
procedure
OFF / 30sec / "1min" / 2min / 3min / 4min / 5min
5min / 15min / "30min" / 60min
.
(LIGHT) -1 / "0" / +1 / +2 (DARK)
0.1sec / 0.3sec / 0.5sec / "1.0sec" / 1.5sec / 2.0sec / 2.5sec / 3.0sec
"0.1sec" / 0.3sec / 0.5sec / 1.0sec / 1.5sec / 2.0sec / 2.5sec / 3.0sec
http://www.manuals4you.com
12. UTILITY mode
89