Removal/Reinstallation Of The Punch Unit - Konica Minolta BIZHUB 501 Service Manual

Field Service Ver.1.0 May. 2008
2.2.5

Removal/reinstallation of the punch unit

A. Installation of the Swedish punch kit G
When installing the Swedish punch kit G, be sure to remove the existing punch unit and follow the procedure
given below.
B. Procedure
[6] [1]
[2][7][8]
[5]
[3] [4]
4521f2c009na
1.
Remove the upper cover.
(See P.6)
2.
Remove the connector [1].
3.
Remove the screws [2] and [3]. After sliding the
punch unit [4] in the arrow-marked direction [5],
remove it in the arrow-marked direction [6].
Note
• The screw [2] is provided with the spacer [7]
and the washer [8]. Be careful that they do not
get lost.
2. OTHERS
11