Punch Unit Vertical Position Adjustment - Konica Minolta bizhub C550 User Manual

Utility mode
6
Press the [Start] key.
Automatic adjustment of the punched hole edge sensor begins.
Once the adjustment is completed, the results screen appears.
7
Touch [Close].

Punch Unit Vertical Position Adjustment

The vertical position of punched holes when printing with a Punch setting
can be adjusted for each paper size.
Note
[Punch Unit Vertical Position Adjustment] appears only if optional Z fold-
ing unit is installed.
For details on the Punch settings, refer to "Punching holes in copies
(Punch settings)" on page 2-89.
0 Before making any adjustments, use a Punch setting to print a sample
copy. Perform the adjustment while checking the sample that was creat-
ed.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator Settings screen" on page 11-51.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
C550
11
11-84