Table of Contents
Advertisement
1-24
microLaser 320 and 401 Installation Guide
Printing a Test Page
Printing a Test Page
Your printer can print a test page that lists the indicates, grey scale, resolution settings, page counter, and
other relevant information about your printer. To print a Test Page, follow these steps:
1.
From the Ready status, press MENU, the control panel display will read:
2.
Press PREVIOUS or NEXT until the display reads:
3.
Press SELECT, the display will read:
4.
Press NEXT or PREVIOUS until the display reads:
5.
Press SELECT, the display will read:
6.
Press SELECT. A single page Test Page will print. An example of a Test Page appears on the following
page.
NOTE:
The size of the Test Page will match the size of the default paper size selected.
Publication No. GEK-89496C
Menu
Paper Menu
Menu
Functions
Functions
Reset Printer
Functions
Print Test
Print Test
Single
Genicom
Jun 99
Advertisement
Table of Contents
Troubleshooting
