Table of Contents
Advertisement
Description of the Control Panel
(continued)
Beeper
Display
Pushbuttons
The control panel beeper sounds momentarily when:
■
a pushbutton is pressed.
■
a BEL control code is received.
■
a PAPER LOW condition exists.
■
an EVFU loading error occurs.
■
a hard fault occurs.
The sixteen-character display tells you:
■
the printer's status - Online, Local, Self-test, etc.
■
what mode the printer is in - Function or Program.
■
which menu or menu option is presently on display to assist in
malting selections.
■
when a fault condition exists.
The pushbuttons are sealed membrane-type switches used to make
menu selections, clear faults, and position the paper.
An
explanation of the pushbuttons' functions is given in the following
section on "Operation of the Control Panel. "
Initialization Switch
2-2
u.,.r·•
Manual
The recessed initialization switch located on the back of the control
panel is used to clear and reset the electronic circuitry of the
printer. A small screwdriver or pencil can
be
used to reach the
switch when needed.
An
explanation of when, why. and how to
initialize the printer is
in
Chapter 1.
Nov 93
Advertisement
Table of Contents
