Auto Low Power; Auto Shut-Off - Oce VarioPrint 1105 User Manual

All in one printer

Hide thumbs Also See for VarioPrint 1105:

Table of Contents

Preparation for Use

Auto Low Power

This function conserves energy by lowering the power consumption to 413W

or less in standby mode.

Auto Low Power activates automatically after a specified period (initially 15

minutes) of copier inactivity with the Power Save LED lit, touch panel gone

off, and all other LEDs except Start LED on the control panel turned off. The

Start LED will turn red, while the Power LED keeps green.

To start a copying job, press or touch any key on the control panel and

touch panel.

The Auto Low Power function can be set to 5 minutes/ 10 minutes/ 15

minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes.

For details,refer to "Lists of the function settings" on page 15-5.

If the Auto Shut-Off function activates at the same time, the power will be

The touch panel will not go off during a duplex copying job or when the

Jam Position Screen is displayed.

This function achieves further energy conservation by reducing power con-

sumption to 75W or less in standby mode.

In the initial setting, Auto Shut-Off follows Auto Low Power after a specified

period (initially 120 minutes) of copier inactivity, with the Power Save LED lit

and all other LEDs on the control panel and touch panel turned off. The Pow-

er LED keeps green.

To start a copying job, press [Power Save]. The copying operation will

become available.

The Auto shut-off can be set for 30 minutes/ 60 minutes/ 90 minutes/ 120

minutes/ 240 minutes, or can be deactivated. For details, refer to "Lists

of the function settings" on page 15-5.

VarioPrint 1105

Show Quick Links

Table of Contents