To Stop Scanning/Printing - Oce VarioPrint 1105 User Manual

Setting Output Methods

9.11.1 To Stop Scanning/Printing

To cancel the tandem copying job
1
Press [Stop] on the control panel of the master machine.
The scanning/printing job stops immediately, and the popup menu ap-
pears on the Copy Screen of the master machine to ask you whether
to continue or terminate the job. At this time, the tandem mode is not
released.
2
Touch [Continue] to go on, or [Exit] to delete all the scanned data and
to release the tandem mode.
To cancel the job in the tandem machine only
1
Press [Stop] on the control panel of the tandem machine.
The tandem machine stops the current operation immediately, and the
popup menu appears on the Copy Screen of the tandem machine to
ask you whether to continue or cease the operation. At this time, the
tandem mode is not released.
2
Touch [Continue] to go on, or [Exit] to delete all the data transmitted to
the tandem machine and to release the tandem mode.
The master machine will take over the remaining print quantity and
complete the job.
VarioPrint 1105
9
9-73