Oce VarioPrint 1105 User Manual page 592

15
02 Function Setting
01 Feed Tray Setting
01 Feed Tray Auto Selection
Select ATS for each tray and the priority of the detec-
tion when ATS functions.
02 ATS Permit
Set ATS on or off.
03 Auto Paper Type
Set the paper type to be selected when ATS func-
tions.
02 Each Function Setting
Image Shift Decimal Point
Select On/Off to enter a decimal point for image shift.
Printer Prohibit Timer
Select the interval time that printing via PC is prohib-
ited after touching the touch keys.
Needless Tab Paper Exit
Select whether or not to discharge the oddments of a
set of tabbed sheets automatically.
Auto Image Shift (Tab Print)
Select whether or not to print the standard-sized orig-
inal having tab part image printed on the right edge
properly onto tabbed copy paper by shifting the
scanned image 12.5 mm to the reicht side.
03 Density Setting
01 Density Shift for Enhance Mode
Select the default density setting for each Enhance
Mode.
02 User Density Setting
Preset the density level which is frequently used.
03 Photo Mode Density Setting
Select the density level set in EE (Auto Density Set-
ting) when the Photo Mode is selected.
04 Image Density Selection
Set the image density lighter or set the maximum dark
level darker, without degrading the image quality.
04 Preset Zoom
Preset the magnification ratio which is frequently used.
15-6
Utility Screen Settings
Setting options
(default is highlighted)
ATS/APS Switch (Trays 1 to 5):
Tray Priority: Tray1/Tray2/Tray3/
Tray4/Tray5
ON/OFF
Paper Type ( Normal )/
Weight ( 62-71g, 72-91g
Coloured Paper ( White )/
Hole-Punch ( No Hole-Punch
Decimal On/ Decimal Off
Off/15 seconds/ 30 seconds
seconds/90 seconds
On /Off
On/ Off
0 - 5 (Text & Photo:2, Low Con-
trast: 3 , Photo: 2 , Text: 2 )
Two levels
Lighter/ Normal /Darker
+1 - -5 (7 levels)
Three types
VarioPrint 1105
Off ,
)/
)
/60