Copy Setting; Reset Setting - Oce VarioPrint 1105 User Manual

User Setting
16.3

03 Copy Setting

16.3.1 01 Reset Setting

Set the copying condition as desired when the machine is reset. Also select
whether to reset the machine or not when inserting a key counter or a copy
card under the following reset conditions.
Resetting the machine:
- when the power is turned off
- when Auto Reset is on
- when Power Save is on
- when copying becomes available by entering the password when User
Authentication/Section Authentication is on
- when a key counter or a copy card is inserted
- when pressing [Reset] on the control panel
01 Initial Setting
Besides the factory default setting (Full Auto), you may set the copying con-
dition as the initial setting as desired.
Full Auto copying condition:
- Original Setting: standard
- Special Image: standard
- Auto Zoom: On
- Zoom: 1.000
- Output Application: See "02 Reset Function Setting"
- Copy Mode: 1-1
- Auto Paper Select: On
- Rotation: On
- ADF: On
VarioPrint 1105
16
16-39