10
2
Touch Pre-Job Recall.
The [Job Check] key will appear on the screen.
3
Touch [Job Check] to review the settings.
-
The Job Recall Check Screen will be displayed.
-
Check the settings of the previous job on the screen.
Note
Recalled settings can be altered from this screen. For details, "Change
the settings from the Check Screen." on page 10-6.
4
Touch [OK].
The settings of the previous output job will be recalled on the Copy
Screen.
5
Position original(s), then press [Start].
10-18
Advanced Information
VarioPrint 1105