Oce VarioPrint 1105 User Manual page 557

Adjustment
Procedure
1
Touch [Adjustment] - [02 Finisher Adjustment] - [06 Perfect Binder Ad-
justment].
2
Touch [09 Clamp CD Width Adjustment] to display the Clamp CD Width
Adjustment Screen.
3
Touch [Next] or [Back] to select the paper size of the body set.
Touching [Next] continuously will change the paper size as follows.
All Size - 8.5x11 - A4 - B5 - A5 - 5.5x8.5 - 16K - A4W - B5W - A5W -
8.5x11W - 5.5x8.5W - Special
4
Touch the [COPY] tab to display the Copy Screen.
5
Select the PB tray or desired main body tray, then press [Start].
A sample pattern of perfect-bound book will be output.
6
Check that the horizontal scanning direction is equal on all pages of the
body set.
If unequalness appears on the latter half of body pages while the
former half shows equalness, proceed to the next step.
If it is not equal on all pages, use [08 Sub Compile CD Width Adjust-
ment].
7
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
8
Use the touch panel keypad to enter the desired adjustment value, then
touch [Set].
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
VarioPrint 1105
13
13-99