Oce VarioPrint 1105 User Manual page 367

Setting Output Methods
3
Press the [Start/Stop] button.
If multi-feeding is detected and the
machine stops even if single sheet is
fed, press the Multi-Feed Detection
button to turn on the lamp below.
!
Details
To interrupt the operation, press the Start/Stop button again.
Note
Using Fold&Staple mode, the finished sets will be delivered to the saddle
stitcher tray of Saddle stitcher SD-501. Be sure to withdraw the saddle
stitcher tray, and open the tray stand when fully withdrawn. For details,
refer to "Selecting an Output Tray" on page 9-8.
!
Details
To fold or fold&staple booklet-styled prints manually, arrange the printed
sheets as shown below before placing them into the post inserter.
VarioPrint 1105
Start/Stop button
ON
OFF
Multi-Feed Detection button
9
9-49