Oce VarioPrint 1105 User Manual page 495

Adjustment
Procedure
1
Touch [Adjustment] - [02 Finisher Adjustment] - [03 Multi Folder (Fold)
Adj.].
2
Touch [01 Folding Position Adjustment] to display the Folding Position
Adjustment Screen.
3
Touch the [COPY] tab to display the Copy Screen.
4
Load the desired size of paper to be adjusted on a tray, specify [Fold-
ing], then press [Start]. A sample pattern (No. 16) will be output.
5
Check the misalignment (a) of the edge of the feeding sheets.
6
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
7
Touch [Next] or [Back] to select the paper size to be adjusted.
Touching [Next] continuously will change the paper size as follows:
All - 11x17 - A3 - B4 - 8.5x14 - A4R - 8.5x11R - 8K - 12x18
8
Use the touch panel keypad to enter the desired adjustment value, then
touch [Set].
Available range: -50 to +50, 1 step = 0.1 mm
Note
When misalignment (a) of step 5 has occurred, enter the "+" value.
9
Repeat the adjustment steps from 3 to 8 until the desired result is ob-
tained.
10
Touch [Return] to restore the Multi Folder (Fold) Adjustment Mode
Menu Screen.
VarioPrint 1105
Paper feed
direction
a
13
13-37