Oce VarioPrint 1105 User Manual page 715

Machine Manager Setting
Procedure
1
Touch [03 User Auth./Volume Track] - [02 Volume Track].
2
Follow the instructions below for adding, changing and deleting the
section setting, and also resetting the copy count.
To change section settings:
- Touch [Next] or [Previous] to display the section name to be
changed and touch to highlight it.
- Touch [Change] to display the Change Registered Section Screen.
- Touch the desired item to be changed and display the input screen.
- Enter the new setting. For the details on entering texts in the input
screen, see the appendix. You may enter eight digits for the pass-
word, eight characters for the section name, and eight digits for the
copy limit.
- Touch [OK] to complete the setting.
- The message will be displayed when the changed password or sec-
tion name is duplicated. Touch [No] to accept the duplication, or
touch [Yes] to enter another password or section name.
To add section settings:
- Touch [Add] to display the Add Registered Section Screen.
- Touch [Section No.] to display the input screen, and enter the sec-
tion number. Touch [OK]. You may enter four digits for the section
number.
- Touch [Section Name] to display the input screen. Enter the section
name and touch [OK]. You may enter eight characters for the sec-
tion name. For the details on entering texts in the input screen, see
the appendix.
VarioPrint 1105
17
17-59