Oce VarioPrint 1105 User Manual page 595

Utility Screen Settings
03 Copy Setting
02 Each Function Setting
Auto select of Booklet copy
Set the machine to automatically select the Booklet
mode when Stapling & Folding or Folding mode is se-
lected.
Original Glass AMS
Set the machine to detect the size of the original and
select the appropriate magnification ratio to corre-
spond to the selected paper size.
ADF AMS
Set the machine to automatically select an appropri-
ate ratio for copying when detecting the original size
placed on the ADF.
Orig. Glass Auto Size Select
Set the machine to automatically select the same size
of copy paper as the original placed on the original
glass.
ADF Auto Size Select
Set the machine to automatically select the same size
of copy paper as the original placed on the ADF
Select Tray when APS Cancel
Select the tray to be automatically selected when APS
is released.
Org./Out Bind Direction Set
Set the machine to conform the binding direction of
the originals and printed sets each other.
Stapling Auto Reset
Set the stapling setting on or off when pressing [Re-
set].
Original Binding Direction
Select to reset or save the original direction setting
made on the Special Original Screen and the bind po-
sition setting made on the Output Mode Screen after
completion of each copying job.
Status Hold When Auto Reset
When Auto Reset functions, select to reset the Platen/
RADF mode to the initial setting, or save the previous
setting.
VarioPrint 1105
Setting options
(default is highlighted)
Auto Select /Not Auto Select
On /Off
On /Off
On /Off
On /Off
.
APS Select Tray
Tray3/Tray4/Tray5
On /Off
On/ Off
Not Release/ Release Per JOB
Hold/ Not hold
15
/Tray1/Tray2/
15-9