Oce VarioPrint 1105 User Manual page 767

Machine Manager Setting
Procedure
1
Touch [04 Network Setting] - [02 Controller NIC Setting] - [10 Alert
Mail].
2
Specify to use e-mail notification, and a destination address to which
to notify.
Select [On] or [Off] to the right of [E-Mail Transmission] to specify to use
e-mail notification.
Touch [Inform E-Mail Trans. Address] to display an input screen. Enter
an address, then touch [OK]. The e-mail address can have maximum
250 characters.
3
Touch [Next].
Select required items to be included in alert e-mail.
If you need no item to be included, touch [Clear All].
4
Touch [OK] to complete the settings and return to the Controller NIC
Setting Menu Screen.
5
Touch [Return] to specify other settings, or touch [Exit] to finish setting.
6
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Details
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
VarioPrint 1105
17
17-111